Leaking Fluids Data

[Kodie]

I'd rather not destroy them, if I try to remove them the tape will just rip the paper.

[08 Thomas EF]

*Shrieks in horror* They shouldn't be taped; they're double-sided and need to be flipped between routes! :o >:(

Route Cards:
These are little black cards that say Rt# __. They are to be placed to the lower right of the windshield (door side) and in the rear window of the bus. They must be changed each time you switch routes, so this will require you to walk to the back of the bus and flip the card.

[LifestarFe]

Correct...they are plastic with suction cups; not paper!!
The Rt. colors, however, are paper...if thats what you meant. (Just say yes...lol)

[LifestarFe]

Are you still expecting to have this bus out for 10 more days?

[Kodie]

Thats when the order was due.

[Kodie]

The part arrived today as scheduled and has been installed on the engine. You're going to notice a new gauge on your dashboard. The new gauge is a flow sensor for that new fitting that was installed. This flow sensor is also in the engine bay, but you don't need to look at that one. As long as the needle remains in the green zone somewhere between 1000 and 3000. The needle will surge on acceleration, but if at speed it goes into the 3500 range, pull over and shut the bus off. If it ever drops below 1000, also pull over, shut the bus off and radio me.

10401 IN SERVICE

The bus is parked back in it's space. Please sweep and clean your spare bus.

[Kyle51895]

10-4! Thank you very much Kodie!